XPass D2

Outdoor Compact RFID Reader

XPass D2
Outdoor Compact RFID Reader
XPass D2 is an outdoor compact RFID reader based on Suprema's state-of-the-art RFID technology and multi-hardware platform. With the multi-form factor technology with mullion-mount, gangbox-type and gangbox keypad-type designs, XPass D2 can be installed in various environments. XPass D2 also supports dual-frequency (125kHz / 13.56MHz) RFID technology and can read the mobile cards using NFC and BLE. Packed in a strong IP67/IK08 box, it is dust & waterproof as well as vandal-resistant, suitable for tough environments and outdoor installation. Xpass d2 module

Features

Multi-Smartcard Reader with Dual Frequency

Featuring dual-frequency RFID card technology, XPass D2 supports both LF(125kHz) and HF(13.56MHz) RFID including all RFID card standards. On top of fingerprint credentials, the XPass D2 supports most types of RFID card standards with a single device including 125 Khz EM, Wiegand format card, 13.56 MHz MIFARE, MIFARE Plus, DESFire EV1/EV2, FeliCa, NFC, and BLE.

Communicates with Smartphones

With Suprema Mobile Access, as a credential, your smartphone is a key to access.

BLE (Bluetooth Low Energy)

Communicates via BLE in Android
Protects data communications using the AES encryption algorithm

NFC (Near Field Communication)

Communicates via NFC’s HCE in Android
* Note that HCE is not available on all Android smartphones. It is recommended to check the smartphone specification, but this feature is widely supported on the latest models.
Protects data communications using AES encryption algorithm

BLE (Bluetooth Low Energy)

Communicates via BLE in iOS
Protecting data communications using the AES encryption algorithm

Standardized Communications

Open Supervised Device Protocol (OSDP)

Combined with Suprema’s intelligent biometric controller, the CoreStation, XPass D2 completes biometrics-driven access control system with enhanced simplicity and level of security of centralized system topology.
Suprema OSDP

Xpass D2 has been verified by SIA (Security Industry Association) to be OSDP compliant. Open Supervised Device Protocol (OSDP) enables encrypted bidirectional communication between readers and controllers.

Learn more about OSDP

Mullion-mount Design

With its 48mm width, the XPass D2 fits perfectly in narrow spaces and door frames.

Gangbox-type Design

XPass D2 offers complete installation in Gangbox locations. You can choose either Gangbox-type or Gangbox Keypad-type depending on your needs.

IP67, Dust & Water Proof

With IP67, XPass D2 is tightly sealed against invasive moisture, dust and liquid. This protection is achieved by Suprema's protective engineering which ensures that XPass D2 remains reliable and functioning in all type of environments.

IK08 Vandal-proof Structure

The XPass D2 comes with a strong, vandal-resistant package. Combining reinforced resin with Suprema’s sophisticated engineering, the XPass D2 is able to withstand a high level of impact, making it vandal-resistant. Coupled with IK08 ingress protection, XPass D2 is the perfect solution for outdoor installations.

High Accessibility

The numeric keypad features LED backlighting for convenient use at night and in the dark. It also has a homing bump on the number five key for ease of use by the visually impaired.

Homing bump

Configuration

Xpass d2 configuration

Specification

Scroll left/right

Scroll left/right

Model Name

Credential

  • RF Option

  • RF read range 2)

  • Mobile Card

Protections

  • IP rating

  • IK rating

General

  • CPU

  • Memory

  • Crypto Chip

  • LCD Type

  • LED

  • Sound

  • Operating Temperature

  • Storage Temperature

  • Operating Humidity

  • Storage Humidity

  • Weight

  • Dimension (WxHxD, mm)

  • Certifications

Interface

  • Wi-Fi

  • Ethernet

  • RS-485

  • RS-485 Communication Protocol

  • Wiegand

  • TTL Input

  • Relay

  • USB

  • SD Card

  • PoE

  • Intercom

  • Tamper

Electrical

  • Power

XPD2-MDB

125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV31), FeliCa

MIFARE/DESFire/EM: 50 mm, FeliCa: 30 mm

NFC, BLE

IP65, IP67

IK08

80 MHz

512 KB Flash + 160 KB RAM

Supported

Not supported

Multi-color

Multi-tone Buzzer

-35°C ~ 65°C (-31°F ~ 149°F)

-40°C ~ 70°C (-40°F ~ 158°F)

0% ~ 95%, non-condensing

0% ~ 95%, non-condensing

Device: 117g, Bracket: 30g (Including washer and bolt)

48 x 144.7 x 27

CE, UKCA, KC, FCC, IC, RCM, BIS, SIG, RoHS, REACH, WEEE, ETL Listed to UL 294

Not supported

Not supported

1ch Slave

OSDP V2 Compliant

1ch

Not supported

Not supported

Not supported

Not supported

Not supported

Not supported

Supported

Voltage: 12 Vdc
Current: Max. 0.3 A

XPD2-GDB

125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV31), FeliCa

MIFARE/DESFire/EM: 50 mm, FeliCa: 30 mm

NFC, BLE

IP65, IP67

IK08

80 MHz

512 KB Flash + 160 KB RAM

Supported

Not supported

Multi-color

Multi-tone Buzzer

-35°C ~ 65°C (-31°F ~ 149°F)

-40°C ~ 70°C (-40°F ~ 158°F)

0% ~ 95%, non-condensing

0% ~ 95%, non-condensing

Device: 140g, Bracket: 52g (Including washer and bolt)

80 x 130 x 25

CE, UKCA, KC, FCC, IC, RCM, BIS, SIG, RoHS, REACH, WEEE, ETL Listed to UL 294

Not supported

Not supported

1ch Slave

OSDP V2 Compliant

1ch

Not supported

Not supported

Not supported

Not supported

Not supported

Not supported

Supported

Voltage: 12 Vdc
Current: Max. 0.3 A

XPD2-GKDB

125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV31), FeliCa

MIFARE/DESFire/EM: 50 mm, FeliCa: 30 mm

NFC, BLE

IP65, IP67

IK08

80 MHz

512 KB Flash + 160 KB RAM

Supported

Not supported

Multi-color

Multi-tone Buzzer

-35°C ~ 65°C (-31°F ~ 149°F)

-40°C ~ 70°C (-40°F ~ 158°F)

0% ~ 95%, non-condensing

0% ~ 95%, non-condensing

Device: 145g, Bracket: 52g (Including washer and bolt)

80 x 130 x 25

CE, UKCA, KC, FCC, IC, RCM, BIS, SIG, RoHS, REACH, WEEE, ETL Listed to UL 294

Not supported

Not supported

1ch Slave

OSDP V2 Compliant

1ch

Not supported

Not supported

Not supported

Not supported

Not supported

Not supported

Supported

Voltage: 12 Vdc
Current: Max. 0.3 A

1)DESFire EV2/EV3 cards are supported by having backward compatibility of DESFire EV1 cards. CSN and smart card functions are compatible with XPass D2.

2)RF read range will vary depending on installation environment.

Accessory

  • Extended Bracket (Mullion-type)

  • Extended Bracket (Gangbox-type)

Peripheral Device

Download

  • Firmware
    XPass D2 MDB/GDB/GKDB Firmware v1.7.2 EN_REV
    Nov 30, 2023
    383.25 KB
  • Manual
    XPass D2 Installation Guide V1.09 EN
    Aug 02, 2023
    2.52 MB
  • Brochures
    XPass D2 Brochure EN
    Jan 20, 2023
    1.90 MB
  • Product Images
    XPass D2 Image (Low Res)
    Jan 03, 2023
    43.12 MB
  • Product Images
    XPass D2 Image (High Res)
    Dec 23, 2022
    119.81 MB
  • Manual
    Device Manager App UG V1.02 EN
    Apr 15, 2021
    3.74 MB
  • Firmware
    XPass D2 GDB/GKDB Firmware v1.3.2 EN
    Apr 15, 2021
    239.32 KB
  • Firmware
    XPass D2 MDB Firmware v1.3.2 EN
    Apr 15, 2021
    239.29 KB
  • Manual
    XPass D2 MDB Drilling Template EN
    Nov 19, 2018
    400.36 KB
  • Manual
    XPass D2 GDB/GKDB Drilling Template EN
    Nov 19, 2018
    398.36 KB

Video